No, that must be it!  I forgot about that setting.
Thank you so much!

> -----Original Message-----
> From: Peter Smith [mailto:petes AT convergentdata DOT net]
> Sent: Wednesday, August 22, 2001 11:39 AM
> To: Collins, Kathy; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Addin drives to NetBackup configuration
> 
> 
> Did you change your storage unit to use 10 drives?
> 
> Peter Smith
> Convergent Data Services Inc. 
> www.convergentdata.net
> 720-482-9559 (work)
> 720-482-0907 (fax)
> 
> 
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Collins,
> Kathy
> Sent: Wednesday, August 22, 2001 10:27 AM
> To: 'veritas-bu AT mailman.eng.auburn DOT edu'
> Subject: [Veritas-bu] Addin drives to NetBackup configuration
> 
> 
> All,
> 
> I have recently added two DLT-7000 tape drives to my L11000 
> Robotic tape
> library bringing me up to a total of ten drives.  All ten 
> drives are setup,
> appear as UP in the Device Management gui, and have been being used
> successfully.
> 
> The problem is that it looks like only 8 drives can be used at a time.
> After I see 8 drives in use, I submit more jobs requiring 
> tape mounts, but
> the jobs just get queued.
> Again, the weird thing is that all drives work fine, just 
> only 8 at a time.
> 
> Am I missing something is a config file somewhere that limits me to 8
> drives?
> 
> Thanks!
> Kathy
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>