[Veritas-bu] Seagate LTO

A brief update...Thanks to everyone who replied. 

The problem was that the STK L700 held the following layout
9840    9840    
9840    9840    
LTO     LTO
LTO     LTO
LTO     LTO
LTO     LTO
9840    9840

One second 9840 drive in the second column went down and through off the
drive numbers and index. Once we figured this out all was well.

Thanks.
~Monica

Monica Hanna
Stack Computer, Inc.
3199-D Airport Loop Drive
Costa Mesa, CA 92626
714-433-2200 ext. 2251
www.stackcomputer.com


-----Original Message-----
From: Christiansen, Valor [mailto:VChristiansen AT geico DOT com]
Sent: Thursday, August 02, 2001 2:29 PM
To: 'Monica Hanna'
Subject: RE: [Veritas-bu] Seagate LTO


I am running with 8 HP LTO drives in a Qualstar 88264 library.  I have the
Library set to TLD and the tapes to HCART.  This is the combination that
works with this particular equipment.  

> -----Original Message-----
> From: Monica Hanna [SMTP:Monica_Hanna AT stackcomputer DOT com]
> Sent: Thursday, August 02, 2001 12:55 PM
> To:   'veritas-bu AT mailman.eng.auburn DOT edu '
> Subject:      [Veritas-bu] Seagate LTO
> 
> Hey Everyone,
> 
> I'm running NetBackup Datacenter 3.4 on a K580 with 11i. My tape library
> is
> an STK L700 with 8 Seagate LTO drives. My problem is that when running a
> backup, the drive mounts the tape but never writes to the tape. The
> library
> will go through several of the tapes before it times out, never writing to
> any of the tapes. I've tried having my drives set to DLT and HCART within
> the media manager. Any suggestions as to what my problem is?
> 
> Thanks for your help.
> 
> Monica Hanna
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu