Veritas-bu

[Veritas-bu] How can I get drive status by cmd line

2001-03-16 15:54:38
Subject: [Veritas-bu] How can I get drive status by cmd line
From: David A. Chapa david AT datastaff DOT com
Date: Fri, 16 Mar 2001 14:54:38 -0600
where it lists the type (tld, avr, tsd, etc.) it will say DOWN

David

<><><><><><><><><><><><><><><><><><><><>
David A. Chapa
Consulting Manager
DataStaff, Inc.
847 413 1144
http://www.consulting.datastaff.com 
---------------------------------------
NBU-LSERV AT datastaff DOT com - Adv. Scripting

-----Original Message-----
From: veritas-bu-admin AT Eng.Auburn DOT EDU
[mailto:veritas-bu-admin AT Eng.Auburn DOT EDU]On Behalf Of Marvin Blackburn
Sent: Friday, March 16, 2001 2:32 PM
To: 'RYAN ANDERSON'; 'Weaver; Paul'
Cc: 'Axel Kunze'; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] How can I get drive status by cmd line


What field indicates up/down?

------------------
Marvin Blackburn
Systems Administrator
Glen Raven
336-586-1200
"He's no failure.  He's not dead yet" --William Lloyd George

> -----Original Message-----
> From: veritas-bu-admin AT Eng.Auburn DOT EDU
> [mailto:veritas-bu-admin AT Eng.Auburn DOT EDU]On Behalf Of RYAN ANDERSON
> Sent: Friday, March 16, 2001 11:39 AM
> To: Weaver; Paul
> Cc: 'Axel Kunze'; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] How can I get drive status by cmd line
> 
> 
> I would use 'vmoprcmd -xdraw ds' it puts out the data you need in an
> easy to awk/grep/whatever format.
> 
> RCA
> 
> "Weaver; Paul" wrote:
> > 
> > Axel,
> >         Several commands will show this information:
> > /usr/openv/volmgr/bin/vmoprcmd, 
> /usr/openv/volmgr/bin/tpconfig [-l|-d].
> > 
> > Paul Wever
> > 
> > -----Original Message-----
> > From: Axel Kunze [mailto:axel.kunze AT dab DOT com]
> > Sent: Friday, March 16, 2001 11:27 AM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] How can I get drive status by cmd line
> > 
> > Hello everybody !
> > 
> > I decided to write a small script, which checks the status 
> of my drives
> > (up/down) ...
> > Is there a command within NBU which shows me the state of my DLT's ?
> > 
> > Regards
> > 
> > Axel Kunze
> > 
> 
> --
> Ryan C. Anderson        |   United Defense L.P.    
> Unix Administrator      |   763.572.6684 (desk)
> ryan_anderson AT udlp DOT com  |   952.235.9936 (pager)
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu




<Prev in Thread] Current Thread [Next in Thread>