Try a boot -r 

I don't think it's sg, it's st that is not making the device.

Bob

-----Original Message-----
From: Matthew Tole [mailto:matt_tole AT yahoo DOT com]
Sent: Thursday, March 01, 2001 11:12 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] sgscan oddity


I am having a problem getting solaris is assign a
device file for a tape drive on a fabric SAN. When I
do an sgscan I get:

/dev/sg/c0t6l0: Disk (/dev/rdsk/c0t0d0): "SEAGATE
ST336704LSUN36G"
/dev/sg/c2t0l0: Changer "STK   L180"
/dev/sg/c4t2l0: Tape (???): "STK   9840"
/dev/sg/c5t0l0: Tape (/dev/rmt/0): "STK   9840"

I have checked the st.conf to make sure that there are
enough lun assignments but short of that I am stuck.
Any ideas.

MT


=====
Matthew Tole
Systems Engineer
PWI Technologies
W(425)576-2153 CLR(425)445-6361

__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail. 
http://personal.mail.yahoo.com/
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu