[Veritas-bu] soft state zalloc failed
2001-03-01 17:10:16
Typically a server is only setup to recognize 8 devices on a SCSI path. You
need to check your LUN and Target settings in the sg.conf and the st.conf
files.
Steve
> -----Original Message-----
> From: veritas-bu-admin AT Eng.Auburn DOT EDU
> [mailto:veritas-bu-admin AT Eng.Auburn DOT EDU]On Behalf Of Charles Jordan
> Sent: Thursday, March 01, 2001 12:47 PM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] soft state zalloc failed
>
>
> I am having some problems with one of my media servers seeing
> all my dlt drives. It has 16 drives attached but it is only seeing
> 8 of them and I am seeing the following messages from the sg driver
> when I run sgscan:
>
> "- soft state zalloc failed"
>
> This also appears during the boot process.
>
> Anyone seen this before?
>
> Charles (Allen) Jordan <charles.jordan AT convergys DOT com>
> System Administrator (407)771-8919
> Convergys
> 285 International Parkway,
> Lake Mary, FL 32746-5007
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
|
|