I have NBU 3.1.5 (upgrading to 3.2 then 3.4 shortly, I hope)  running on NT4
on a P550 master with 3 slaves (1 DLT7000 per slave and 3 on the master, may
be pushing it a bit).
My scheduler is set to run every 10 minutes, but sometimes a second
scheduler starts b4 the previous is finished.

What can I do to speed things up?
I have 97 classes for 140 clients, I could cut the classes down, but that
would be awkward.
Or perhaps upgrade CPU.

What are my best options?


Thanks
Bob


This e-mail, its content and any files transmitted with it are intended solely 
for the addressee(s) and are confidential and may be legally privileged.  
Access by any other party is unauthorised without the express prior written 
permission of the sender.  If you have received this e-mail in error you may 
not copy, disclose to any third party or use the contents, attachments or 
information in any way.  Please destroy it and contact the sender via the 
Thomson Financial switchboard on (44) 207 369 7000 or via e-mail return.  
Internet communications are not secure unless protected using strong 
cryptography.  This e-mail has been prepared using information believed by the 
author to be reliable and accurate, but Thomson Financial does not accept 
responsibility for the timeliness, accuracy or completeness of the information 
provided or for any changes to this e-mail, howsoever made, after it was sent.  
[The content of this e-mail and files transmitted with it is  (c) TFSL - 2000]