[Veritas-bu] DLT 4000 to DLT 7000 conversion

Veritas-bu

[Top] [All Lists]

[Veritas-bu] DLT 4000 to DLT 7000 conversion

2000-05-03 09:48:10

Subject:	[Veritas-bu] DLT 4000 to DLT 7000 conversion
From:	Paul Windsor windsorpj AT lmtas.lmco DOT com
Date:	Wed, 03 May 2000 08:48:10 -0500

We are using NetBackup 3.2 on a SUN4000 (Solaris 2.6) and using two STK
9710 silos with 10 DLT 4000 each. Our plan is to upgrade the tape drives
to DLT 7000s. The questions are:

  1. Will NetBackup be able to read existing backup tapes ( the DLT IV 
      carts are used )

  2. After the upgrade will the tapes be written in DLT7000 mode or
must      the tapes be blank labeled 

  3. I have seen several different DLT7000 definitions for the st.conf
      file .... what is correct


Thanks for the help,

Paul

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Veritas-bu] DLT 4000 to DLT 7000 conversion, Paul Windsor windsorpj <= [Veritas-bu] DLT 4000 to DLT 7000 conversion, Mark Smiles msmiles [Veritas-bu] DLT 4000 to DLT 7000 conversion, Simon Lurye simon . lurye [Veritas-bu] DLT 4000 to DLT 7000 conversion, Robert Bakh bbakh

Previous by Date:	[Veritas-bu] Schedules, TAHUNTER
Next by Date:	[Veritas-bu] Netbackup Catalog backup, Jim
Previous by Thread:	[Veritas-bu] Schedules, TAHUNTER
Next by Thread:	[Veritas-bu] DLT 4000 to DLT 7000 conversion, Mark Smiles msmiles
Indexes:	[Date] [Thread] [Top] [All Lists]