[Veritas-bu] Automating Configuration
2000-04-05 10:56:34
Robin,
Some of this can be automated. You will still need to install the
software and the patch and configure the devices. Once that is complete
you can stop the software, copy over the following files:
\veritas\volmgr\vm.conf (make sure the only entry here is your SCRATCH_POOL
entry and make sure there is a carriage
return at
the end of the line)
\veritas\volmgr\database\poolDB
\veritas\volmgr\database\ruleDB
\veritas\netbackup\db\class (copy the entire directory)
Once you do this, restart the software. You will need to go through
and clean up your classes and make your changes. But everything
should work from that point.
I would test this first and make sure there are no holes in the process.
Rich Parkinson
Veritas Consultant
-----Original Message-----
From: Brandl, Robin [mailto:Robin_Brandl AT csx DOT com]
Sent: Wednesday, April 05, 2000 7:39 AM
To: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] Automating Configuration
I'm trying to find a way to automate configuring NetBackup 3.2 For NT Master
Servers. Basically every site I deploy has the same config (i.e. Pools,
Schedules) Could anyone give me any information on automating this or
copying the Configuration From one Master Server to the next???
Any help is appreciated...
Thanks,
Robin
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|