Hi Paul,

The storage node list should be:

backup-old
nsrserverhost


/tony


Tony Albers  - Technical Consultant  -  Proact Systems A/S
Tel: +45 7010 1132 - Mobile: +45 2210 5208 - Fax: +45 7010 1142
toal AT proact DOT dk  www.proact.dk - We secure mission-critical information -

On 08/29/2012 03:56 PM, Paul Key wrote:
> Thanks Bingo
>
> How do I verify the storage node list?  There is an old M1800 library
> and server configured as a storage node in addition to the 'main' SL500
> library.  I have been trying to scan in the 'old' M1800 SDLT Type II
> tapes .
>
> The set-up looks like this
>
> backup-main server - SL500 tape library attached.
> backup-old server - M1800 tape library attached. (Configured as a
> storage node of backup-main)
>
> Scanning from backup-old to backup-main.
>
> The clients from the backup-old server have been added to the client
> list on the backup-main server as M1800-xyz.  Bingo, as you mention that
> the storage node list for the clients is not right - what should the
> storage-nodes parameter for the M1800-xyz clients be?  Its currently set
> to "nsrserverhost".
>
> Thanks for your help.
>
> Paul
>
> On 24/08/2012 02:30, bingo wrote:
>> Each NW host uses the ports 7937 and 7938 (for the built-in
>> portmapper). Make sure that these are available before you start
>> nsrexecd.
>>
>> NW has the intention to repeat error messages more than necessary.
>> Some appear about 50..60 times/s. You can not change this.
>>
>> Probably, the storage node list for the clients is not right so the
>> media is expected at another (remote) SN.
>>
>> +----------------------------------------------------------------------
>> |This was sent by carsten_reinfeld AT avus-cr DOT de via Backup Central.
>> |Forward SPAM to abuse AT backupcentral DOT com.
>> +----------------------------------------------------------------------
>