Hello,
Its been a while i have worked on Adic, but one thing i can suggest is to load
the tapes in the lib drives whichever your restore calls and then let it run,
when Legato asks for addtional tapes, you will need to open the library and
mount more, this is not ideal or good way to do things, however, in a bind you
can get around, other option is to buy one tape drive that is stand along ,
reconfigure legato and run the restore manually.
Every situation is a challenge and therefor, looking for solutions around it is
worth a try.
HTH
Fazil
> Date: Sun, 13 Mar 2011 18:53:27 +0100
> From: Thierry.Faidherbe AT SKYNET DOT BE
> Subject: Re: [Networker] i2k library failed - no maintenance - how to restore
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
>
> The only thing I can think about is using ADIC Drives
> our of library control (manually nsrmm [-m/-u] -f <path_drive_>
> and mt -f <path_drive> offline).
> For faster tape lookup, take tapes our of the lib,
> sort tapes by barcodes and manually load/unload drives.
>
> Another solution is, based on your user requests, to stage/clone
> your actual needed volumes to your new disk array.
> If no user restore are pending start mounting tapes manually
> in reverse order (last used first) and stage/clone to your ne disk lib.
>
> Anyway, asking a repair assess may be useful, do you really plan to
> completely remove tapes from your backup strategy ?
>
>
> HTH
>
> TH
>
> -----Original Message-----
> From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> On
> Behalf Of terry.lemons AT EMC DOT COM
> Sent: vendredi 11 mars 2011 20:14
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: Re: [Networker] i2k library failed - no maintenance - how to
> restore
>
> Hi
>
> Not sure why you're hunting me, as I'm no fountain of ADIC Scalar i2000
> knowledge :).
>
> Since you don't want to repair the robotics, but still want to avoid
> manually looking for tapes, I'm not sure how to make this work. You need
> the robotics working in order to scan the slot locations, to create the map
> of what is where.
>
> Anyone think of a way to make this work?
>
> Thanks
> tl
>
> >
> > -----Original Message-----
> > From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
> > On Behalf Of d3h614
> > Sent: Thursday, March 10, 2011 12:11 AM
> > To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> > Subject: [Networker] i2k library failed - no maintenance - how to
> > restore
> >
> > Using Legato 7.4 - we have a adic i2k library that is out of
> > maintenance and the robotics failed. i really need to be able to
> > restore data to a stand-alone drive -- does anyone know how to
> > configure this so that i can do a restore to a standalone drive. We
> > don't want to pay for parts and labor as we have just started to backup
> > to disk anyway - - but we have users that need restores from prior
> > date. Do I need to remove the current library and jbconfig the new
> > standalone on the networker server? I am trying to figure out a
> > different way as we have 800 tapes in that library and I don't want to
> > manually look for every tape each time a restore request comes in until
> > the retention is over. I welcome any ideas. thank you
> >
> > Terry Lemon .. you still out there :)
> >
> > +----------------------------------------------------------------------
> > |This was sent by laura.myles AT pnl DOT gov via Backup Central.
> > |Forward SPAM to abuse AT backupcentral DOT com.
> > +----------------------------------------------------------------------
> >
> > To sign off this list, send email to listserv AT listserv.temple DOT edu and
> > type "signoff networker" in the body of the email. Please write to
> > networker-request AT listserv.temple DOT edu if you have any problems with
> > this list. You can access the archives at
> > http://listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type
> "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this
> list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems with
> this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
