[Networker] DRIVE_STATUS_UNSET
2011-01-20 04:38:33
Hi all.
On Windows Server 2003 64 set Netvorker Server 7.6.
On Windows Server Datacenter Edition SP2 installed Netvorker Client 7.6
There is a tape library IBM TS3500 and about 400 tapes and 8 drives.
Launched several tasks, 2 of them fail. In the message logs:
NetWorker media: (warning) \\.\Tape5 reading: read open error: the device file
name specified is unusable by CDI (drive status is DRIVE_STATUS_UNSET)
NetWorker media: (warning) The \\.\Tape5 is either skipped as requested (due to
hardware problem) or no longer connected to the storage node.
If the reconfiguration is done in the log message:
NetWorker media: (warning) Can't create new LTO Ultrium-4 : Found new IBM
ULT3580-TD4 A23 but cannot find device driver. Please check device driver
installation.
The remaining six drives work and write to tape without any problems.
+----------------------------------------------------------------------
|This was sent by admin AT nefka DOT ru via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|