Re: [Networker] New cleaning tape question
2010-10-12 11:10:28
Check to be sure your tape library is configured to allow NetWorker to use slot
42. Failing that, you might do well to open a support case with EMC so they
can open a WebEx session with you to see exactly what is going on.
On Oct 12, 2010, at 10:51 AM, Paul Key wrote:
> Thanks
>
> I tried nsrjb-U 20 but am still getting emails and messages saying:
>
> NetWorker cleaning cartridge required: (notice) cannot find usable
> cleaning slot for drive `/dev/rmt/0cbn'.
>
> The cleaning slot is defined as slot 42
>
> Any ideas on how to help the drive find a cleaning slot?
>
>
> STANLEY R. HORWITZ wrote:
>> nsrjb -Un
>>
>> Where "n" is the number of tape cleanings the cartridge allows. This number
>> is usually indicated on the cleaning cartridge's packaging,
>>
>> On Oct 11, 2010, at 11:00, "Paul Key" <pkey AT SGUL.AC DOT UK> wrote:
>>
>>
>>> Quantum / ATL M1800 Tape Library
>>> Solaris 8
>>> Legato 7.2
>>>
>>> Hi
>>>
>>> We have a M1800 library which I have recently changed the cleaning tape
>>> in - the cleaning tape is stored in a 'fixed slot'. I have cleaned all
>>> 4 x SDLT600 tape drives but am getting the following message regularly:
>>>
>>> Mon 03:40:13 PM cleaning cartridge required notice: cannot find usable
>>> cleaning slot for drive `/dev/rmt/0cbn'.
>>>
>>> Does anyone know how I tell the library about the new cleaning tape?
>>> And how I can get rid of the above message?
>>>
>>> Thanks
>>>
>>> Paul
>>>
>>> To sign off this list, send email to listserv AT listserv.temple DOT edu
>>> and type "signoff networker" in the body of the email. Please write to
>>> networker-request AT listserv.temple DOT edu if you have any problems with
>>> this list. You can access the archives at
>>> http://listserv.temple.edu/archives/networker.html or
>>> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>>>
>>
>> To sign off this list, send email to listserv AT listserv.temple DOT edu and
>> type "signoff networker" in the body of the email. Please write to
>> networker-request AT listserv.temple DOT edu if you have any problems with
>> this list. You can access the archives at
>> http://listserv.temple.edu/archives/networker.html or
>> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>>
>
> --
> Paul Key
> Systems Developer
> Computing Services
> St George's, University of London
> Jenner Wing (Ground Floor)
> Cranmer Terrace
> London
> SW17 0RE
>
> Email: pkey AT sgul.ac DOT uk
> Direct Dial: 020 8725 3420
> Ext: 3420
> Fax: 020 8725 3583
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|