Re: [Networker] Using LTO3 in LTO4 drives?
2010-04-29 23:16:58
Thanks all for the responses this far. George -- this is the question I would
be asking next, so I too am interested in knowing if we could continue to use
LTO3 tapes once we have replaced all drives in the library to LTO4.
Andrew
----- Original Message -----
From: "George Sinclair" <George.Sinclair AT NOAA DOT GOV>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Sent: Thursday, April 29, 2010 10:31:15 PM GMT -05:00 US/Canada Eastern
Subject: [Networker] Using LTO3 in LTO4 drives?
Is it a problem to recycle older LTO-3 media in LTO-4 drives and label
these into the same tape pool? This is in an all LTO-4 drive tape library.
I've had no issues reading from LTO3 tapes in the LTO4 drives, and they
are supposed to be backward write compatible (haven't tried that yet),
but will NW span mixed tapes properly, assuming all drives are LTO4?
George
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|