Re: [Networker] LTO3 and LTO4 in a single tape library
2010-04-29 19:06:31
I ended up creating a new pool and setting it to use the LTO4 drives
exclusively, but also allowed my old LTO3 pools to use the LTO4 drives.
This worked out well for me. I'm using a Qualstar XLS library,
attached to Solaris 10 box.
--Mel
On Apr 29, 2010, at 6:34 PM, Tim Mooney <Tim.Mooney AT NDSU DOT EDU> wrote:
In regard to: [Networker] LTO3 and LTO4 in a single tape library,
Dietz,...:
We just added 2 new LTO4 drives in a StorageTek SL500 tape library
with
4 existing LTO3 drives.
My question is this -- can I label new LTO4 tapes to the same pool as
other LTO3 tapes and expect NetWorker to be smart enough to load LTO3
tapes only to LTO3 drives and LTO4 tapes only to the new LTO4 drives
No.
, or
should I create a new and separate tape pool for the new LTO4
tapes? We
did get new L4 labels for the new LTO4 tapes.
That's worth a try.
Tim
--
Tim Mooney Tim.Mooney AT ndsu DOT
edu
Enterprise Computing & Infrastructure 701-231-1076
(Voice)
Room 242-J6, IACC Building 701-231-8541
(Fax)
North Dakota State University, Fargo, ND 58105-5164
To sign off this list, send email to listserv AT listserv.temple DOT edu
and type "signoff networker" in the body of the email. Please write
to networker-request AT listserv.temple DOT edu if you have any problems
with this list. You can access the archives at http://listserv.temple.edu/archives/networker.html
or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|