When you did import the volume into media db (scanenr -m),
it used device media type of the device you used to
scan the tape because networker is not aware which kind
of media you are importing to. Normal behaviour for me.
If you want to have it known as a LTO-3 tape, you will have
to delete the tape record from mediadb (remove volume)
and retry scanner -m operation on a LTO-3 Type tape device.
HTH
Th
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of George Sinclair
Sent: samedi 27 février 2010 4:31
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] mminfo reports wrong media type?
Scanned some save sets from an LTO-3 tape on an LTO-4 drive using '-m'
option, not '-i'. Scan identified it as an LTO Ultrium-4 tape, but
everything scanned fine. However, mminfo reports the type as 'Ultrium
LTO-4'? mminfo does report all the information correctly, though, e.g.
name,client,savetime,ssid, etc. I can mount the tape and recover the data
just fine. How can I get mminfo to report it as an LTO-3?
I tried rerunning the scan as:
scanner -s server -t 'LTO Ultrium-3' device
This time scanner reported is an LTO Ultrium-3, but mminfo still reports the
volume as an LTO-4.
Thanks.
George
--
George Sinclair
Voice: (301) 713-3284 x210
- The preceding message is personal and does not reflect any official or
unofficial position of the United States Department of Commerce -
- Any opinions expressed in this message are NOT those of the US Govt. -
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|