On 12 16, 2009, at 11:50 AM, MIchael Leone wrote:
> I always used to let my library handle cleaning, so I never had to reserve
> cleaning slot, or schedule cleaning jobs using Networker, etc. But since I
> upgraded my SDLT600 library to LTO4, I decided to use Networker to handle
> cleaning. So I set the last 5 slots to be cleaning slots, and adjusted the
> number of available slots and cleaning slots in the Networker definition
> of the library accordingly. Then I loaded up 5 new, unused cleaning tapes
> into the slots.
>
> Networker sees the 5 cleaning tapes in the right slots, but says each is a
> "Cleaning Tape (0 uses left)". Why does it think there are 0 uses left?
> From looking through the Admin guide, it does not appear that I need to
> set tape to the number of uses left.
>
> What am I missing here?
You need to set the cleaning tape usages manually. Use "nsrjb -U" to do so.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|