Here's how to change the label that's reported to NetWorker from a
Quantum/Adic i2000. I assume the Adic 24 and Adic 500 would be similar:

On the library front panel, go into <View>/<library(Physical)>
Select <Setup>/<Partitions>
Select the partition to be used and <Modify>. 
Press <Next>
Set <Return Media Identifier> to <Disabled> (to return 6-character labels)
Press <Next> multiple times, followed by <Finish>.

I don't have an ADIC unit here that I can check, but IIRC when you go into
<Return Media Identifier> the default is "Suffix", meaning the library would
transmit AB1234L3. The other choices are "Prefix" (L3AB1234) and "Disabled"
(AB1234).

As Davina said, change one or the other jukebox and your problem should go away.

Conrad



On Wed, 28 Oct 2009 23:28:01 +0000, Davina Treiber
<Davina.Treiber AT PEEVRO.CO DOT UK> wrote:

>faro_sam wrote:
>> We have Adic 500 and Adic 24 on Adic 500 the labels reads and shows all
>> 8 Characters where as on Adic 24 it shows or reads only 6 Characters.
>>
>> did anybody know if this is the issue with N/W or Barcode Reader of the
library
>
>Definitely not a NetWorker issue, NetWorker just uses what the library
>tells it.
>
>It is likely that one or both of the libraries has a firmware setting to
>change the way the barcodes are transmitted. I assume that the
>difference is the trailing L4/L3 etc. If you can change one of them to
>match the other you will find that operations are simplified.
>
>To sign off this list, send email to listserv AT listserv.temple DOT edu and 
>type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
>via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>=========================================================================

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER