Networker

Re: [Networker] LTO tape levels

2009-06-05 07:26:44
Subject: Re: [Networker] LTO tape levels
From: Nico De Ranter <nico AT SONYCOM DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Fri, 5 Jun 2009 13:18:16 +0200
it's a Quantum Scalar PX502. I'm not sure what brand the drives itself
are.  I kind of assumed the L1...L4 was there for humans only as my
other Quantum LTO2 drive accepts LTO-2 tapes with L1 labels just fine
(and uses them as LTO-2 tapes)

Nico


On Thu, 2009-06-04 at 17:15 +0200, denis.mail.list AT free DOT fr wrote:
> Hello,
> 
> if your barcode is a code 39, you should see that the tape numbers always end 
> with L2, L3 or L4, thus specifying the type of tape.
> 
> What king of jukebox are you using ?
> 
> Denis
> 
> ----- "Nico De Ranter" <nico AT SONYCOM DOT COM> a écrit :
> 
> > I always assumed the barcode labels on LTO tapes could contain any
> > sequence of letters and digits.  However I recently upgraded our
> > LTO-1
> > setup to LTO-4. When I replaced catridges today I ran out of LTO-4
> > labels (that came with the new device) so I took one of the old
> > labels
> > (ending in -L1) and put that on the LTO-4 tape.  Now Networker is
> > refusing to label the tape claiming it's an "incompatible medium". 
> > 
> > Is this indeed due to the label or is this a coincidence and do I
> > happen
> > to have a broken tape?  I need to be sure as I'm about to order extra
> > tapes. If I can't keep on using my supply of ...-L1 labels I may want
> > to
> > order prelabeled tapes in stead
> > 
> > (In the past I have used ..-L1 labels on LTO-2 tapes without any
> > problems.)
> > 
> > Thanks in advance,
> > 
> > Nico
> > 
> > To sign off this list, send email to listserv AT listserv.temple DOT edu and
> > type "signoff networker" in the body of the email. Please write to
> > networker-request AT listserv.temple DOT edu if you have any problems with
> > this list. You can access the archives at
> > http://listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER