[Networker] NDMP Recover Error
2009-03-20 12:56:16
James Pratt wrote:
>
> Apologies - Fazil is correct - not sure how I missed it but the -M means
> you are doing network backups, my bad. Not sure why you would not use
> the integrated san part of the celerra there for network-less backups,
> but perhaps that model does not give you a spa2/spb2 FC port. (In my own
> experience, EMC did not offer to do the NDMP setup since it requires
> someone with experience with both nw and celerra - we had to have
> consultants do it the first time for us, then you watch/read/learn etc.
> etc) ..
>
> We set up our tape pools according to group retention times, as we don't
> want space sitting unusable on too many volumes due to networker's way
> of judging when a volume is recyclable, yet want things not too
> cluttered up.
>
> I can say, networker blows backup exec away once it's set up and
> working properly - it's rough at first I will agree there though - in
> our case they botched the install and set it all up with too large of
> volumes on the vtl model they chose, so backups ran out of space fast
> which was a nightmare looking back, but was good in hindsight, since I
> got to learn the hard way and rebuilt it all myself the "proper way"
> after reading the manuals..
>
> jamie
>
>
>
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
I'll look to see if the Celerra has a spa2/spb2 FC ports on it. Networkless
backups would obviously be the best option.
If we decide, which I think we will to redue our tape pools, what is the proper
way to do that? Do I just create a new pool and relabel the volume?
Suppose I'll try to get my hands on as much information as I can, don't want to
keep annoying ya'll.
Again, thanks for all the help.
Jason
+----------------------------------------------------------------------
|This was sent by jdrescher AT joa DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|