Re: [Networker] Persistent Binding - IBM "non-exclusive" drivers
2009-02-25 13:17:09
Hello,
We use hardware which is similar to yours, you should use either IBM's
checked drivers or qualified by MS testing as indicated at IBM site,
additionally, higher level of drivers and\or Networker allows you to use
features within the driver that makes drivers persistent across reboot (
as documented in newer release of networker and IBM release notes for the
driver).
Note: Tivoli drivers ( this is an option within ibm drivers during
install) are recommended as i recall that all the Tivoli driver does it
disallows simultaneous access to tape drive should another application on
the server wants it ( safer that way)
Additional persistent binding via HBA vendor and via setup from Adic is
possible and may be used.
HTH
brerrabbit <networker-forum AT BACKUPCENTRAL DOT COM>
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
02/25/2009 11:41 AM
Please respond to
NETWORKER AT LISTSERV.TEMPLE DOT EDU
To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc
Subject
Persistent Binding - IBM "non-exclusive" drivers
Greetings -
We've been experimenting with persistent binding in our environment and
have recently gotten it to work in our lab using the latest version of the
"non-exclusive" IBM driver - the "exclusive" version does not work. Our
environment is:
- Networker server version 7.4.4 running on a Windows 2003 sp2 server.
- Several EDL based VTL's that emulate ADIC i2000 libraries with LTO3
drives (all VTL drives are dedicated).
- A physical ADIC i2000 library with LTO3 and LTO4 drives that use
dynamic drive sharing.
The question for the forum is, is there anything about the non-exclusive
version of the IBM driver that raises red flags? We intend to do more
testing, but if this is a dead end I'd rather spend the time elsewhere.
...and if/when we get this to work, I'm posting the process to the wiki,
it's been...err...fun.
Thanks in advance
--brerrabbit
+----------------------------------------------------------------------
|This was sent by drhulme AT tarrantcounty DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|