NeilD wrote:
> Have you checked CDI is switched off in Neworker for the drives?
> 
> 
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER


Thank you, NeilD, for CDI
I have disabled it . And it seems like one drive works properly.
But there is another question...
Now i have following

[email protected]:HP      Ultrium 3-SCSI  M63S|Tape, /dev/sg0
                                           S/N: HU10810A9F
                                           ATPN:HP      Ultrium 3-SCSI  
HU10810A9F
                                           WWNN:50060B0000630122
                                           WWPN:50060B0000630120
                                           PORT:00000001
[email protected]:HP      Ultrium 3-SCSI  M63S|Tape, /dev/nst1
                                           S/N: HU1080639T
                                           ATPN:HP      Ultrium 3-SCSI  
HU1080639T
                                           WWNN:50060B00006301AE
                                           WWPN:50060B00006301AC
                                           PORT:00000001

Second one - /dev/nst1 works fine.
But /dev/sg0 doesn't work.

What should i do to determine drive path(link) for the system ?
There should be some conf file as i guess...

+----------------------------------------------------------------------
|This was sent by vkaj AT tengizchevroil DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER