Networker

Re: [Networker] Networker Can not unload tapem backup keeps waiting

2008-05-07 08:09:58
Subject: Re: [Networker] Networker Can not unload tapem backup keeps waiting
From: Frank Swasey <Frank.Swasey AT UVM DOT EDU>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 7 May 2008 08:06:50 -0400
Hi,

I will assume that the "idle device timeout" value is at the default of 0. You can check that by setting diagnostic mode in the view menu of NMC, then open the properties of the jukebox, and select the Timers tab.

A value of 0 means that networker should never unload an idle device and it will quite stubbornly leave tapes in drives forever demanding that writable tapes be mounted.

I have developed a habit of always updating that value to 10 (minutes).

Frank

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>