Hello,
'Attempted to use -o switch on windows platform failed, no such option, 
does any one have better routine on deleting pools & re-creating it ?
It almost feels like DR , whenever a new device is introduced in Networker 
VTL environment as we have to re-create the lib.
Thanks



"Browning, David" <DBrown AT LSUHSC DOT EDU> 
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
02/22/2008 10:02 AM
Please respond to
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please respond 
to
"Browning, David" <DBrown AT LSUHSC DOT EDU>


To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc

Subject
Re: [Networker] NSRADMIN Help






Jbedit has an override switch, and I use it to add drives / storage nodes. 
 Not sure if that is what you are looking for. 

>From the jbedit command reference: 

?o Override information reported by the jukebox. If jbedit is being run 
on the node to which the jukebox robotic is attached, it queries the 
jukebox about the number of drives it has and verifies that the addition 
or deletion being done does not result in a conflict with this reported 
number. To ignore this conflict and go ahead with the addition or 
deletion, use the
-o flag to override the jukebox information.

David M. Browning Jr.
IT Project Coordinator Enterprise Backups and Help Desk
(504) 568-4364 (Direct)
(504) 654-7520 (BlackBerry number)
 
 

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On 
Behalf Of Fazil Saiyed
Sent: Friday, February 22, 2008 9:51 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] NSRADMIN Help

Hello,
I am trying to edit jukebox attributes as follows and i get an error that
the attribute is read only, i have to do this for VTL since everytime i
add more drives to the VTL jukebox as defined in the Legato , the drive
count does not go up ( for new SN servers being added).
We are on Windows 2003X 63 Bit, Networker 7.3.3  64 Bit.


 number devices: 39;
  number drives: 39;

Does any one have suggestions, do i need to put nsradmin in different mode
then default.
Or do i really have to recreate my jukebox, that this attributes are set
the first time jukebox is created and cannot be modified ? can jbedit help
?
Thanks

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type 
"signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type 
"signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER