[Networker] Server/SN behavior when devices are busy
2007-12-18 20:50:31
Networker 7.4 on Windows 2k3
When all the available tape drives for NetWorker are in use to other backups
being performed, and further backups are attempted from other storage nodes,
the NetWorker application generates an error indicating that the backup can not
be performed due to all the available tape drives that are currently in use.
This error message is repeated over and over again approximately every 2
minutes or so.
Does NetWorker send the SCSI commands to the tape library and attempt to insert
a tape into the busy tape drive, OR does NetWorker realize that the tape drive
is in use and not send any SCSI commands to the tape library because NetWorker
knows that the tape drives are all in use?
Thanks,
Michael
+----------------------------------------------------------------------
|This was sent by ct2msb AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Networker] Server/SN behavior when devices are busy,
ct2msb <=
|
|
|