Re: [Networker] Dynamic World WIde Naming
2007-11-12 11:04:16
I should add that this is a new configuration for us.
We add the LTO2 drives to the SAN and enabled DWWN on the L700e. We are
zoning wwn to wwn.
We do have some of the tape drive "direct" connected to our current backup
server with no issues. But the ones attached to the new backup server
through the SAN are giving issues. The errors I am seeing in Legato
are "cannot decode block, tape positioning disable", get an I/O error when
labeling a tape (the tape is successful in labeling).
Here are some of the error messages we are seeing.
Nov 2 13:41:46 thor root: [ID 702911 daemon.notice] NetWorker media:
(warning) /dev/rmt/S8cbn reading: I/O error
Nov 2 13:41:46 thor root: [ID 702911 daemon.notice] NetWorker media:
(warning) /dev/rmt/S8cbn reading: Tape label read for volume ? in pool ?,
is not recognised by Networker: I/O error
Nov 2 13:41:48 thor root: [ID 702911 daemon.notice] NetWorker media:
(info) LTO Ultrium-2 tape will be over-written
Nov 2 14:05:09 thor scsi: [ID 107833 kern.warning]
WARNING: /pci@1e,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/st@w500104f0005daf0a,0
(st3):
Nov 2 14:05:09 thor Error for Command: write Error
Level: Fatal
Nov 2 14:05:09 thor scsi: [ID 107833 kern.notice] Requested Block:
761 Error Block: 761
Nov 2 14:05:09 thor scsi: [ID 107833 kern.notice] Vendor:
IBM Serial Number:
Nov 2 14:05:09 thor scsi: [ID 107833 kern.notice] Sense Key: Media
Error
Nov 2 14:05:09 thor scsi: [ID 107833 kern.notice] ASC: 0x9 (track
following error), ASCQ: 0x0, FRU: 0x36
Nov 2 14:05:09 thor root: [ID 702911 daemon.notice] NetWorker media:
(warning) /dev/rmt/S6cbn writing: Invalid argument, at file 83 record 763
Nov 2 14:05:09 thor root: [ID 702911 daemon.notice] NetWorker media:
(notice) LTO Ultrium-2 tape 206963 on /dev/rmt/S6cbn is full
Nov 2 14:05:09 thor root: [ID 702911 daemon.notice] NetWorker media:
(notice) LTO Ultrium-2 tape 206963 used 23 GB of 190 GB capacity
Nov 2 14:05:48 thor root: [ID 702911 daemon.notice] NetWorker media:
(notice) Volume "206963" on device "/dev/rmt/S6cbn": Block size is 32768
bytes not 65536 bytes. Verify the device configuration. Tape positioning by
record is disabled.
I do have cases open with Sun and Legato.
Thanks,
Paul
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|