[Networker] HELP!! Getting error "Tape positioning by record is disabled"
2007-10-03 13:16:57
I'm running Legato Networker 7.3 on Solaris 9 with a SpectraLogic 2k
tape library
wtih dual Ait-5 drives inside.
My tapes are being marked full prematurely. I'm getting this error in
my logs which I thnk
is causing it. What does this mean and how do I fix it? I have the
st.conf entry set the way
that Spectralogic told me to. From what I understand the st.conf
entry is set to a variable
block size.
Here are the errors I get just before it marks my tapes full
Notice this error which I think is key
Cannot decode block. Verify the device configuration. Tape
positioning by record is disabled.
How do I fix this?
10/02/07 20:12:12 nsrd: media warning: Jukebox `[email protected]'
Hardware status of jukebox '[email protected]' changed from 'ready' to
'detected hardware change'
10/02/07 20:12:13 nsrmmgd: Resynchronizing jukebox `[email protected]'
with nsrlcpd.
10/02/07 20:12:46 nsrd: media info: Jukebox `[email protected]' Hardware
status of jukebox '[email protected]' changed from 'detected hardware
change' to 'ready'
10/02/07 20:13:34 nsrd: media info: WORM capable for device
/dev/rmt/1cbn has been set
10/02/07 20:29:31 nsrd: media warning: /dev/rmt/1cbn moving: fsr
6318: drive status is Media Error, Reposition Error
10/02/07 20:29:31 nsrd: media emergency: could not position 000010 to
file 127, record 6319
10/02/07 20:29:31 nsrd: media info: WORM capable for device
/dev/rmt/1cbn has been set
10/02/07 20:29:32 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:32 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:33 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:33 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:33 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:33 nsrd: media warning: /dev/rmt/1cbn reading: I/O error
10/02/07 20:29:34 nsrd: media notice: Volume "000010" on device
"/dev/rmt/1cbn": Cannot decode block. Verify the device
configuration. Tape positioning by record is disabled.
10/02/07 20:29:34 nsrd: media warning: verification of volume
"000010", volid 4278364588 failed, can not read record 6319 of file
127 on 8mm AIT-5 tape 000010
10/02/07 20:29:34 nsrd: media notice: verification of volume
"000010", volid 4278364588 failed, volume is being marked as full.
10/02/07 20:29:34 nsrd: write completion notice: Writing to volume
000010 complete
10/02/07 20:29:34 nsrd: media notice: Save set (2248325853)
erdfilespace:/Volumes/DATA1 volume 000010 on /dev/rmt/1cbn is being
terminated because: Media verification failed
10/02/07 20:29:34 nsrd: mmd 1, authorized mode (0), active mode (0),
re-setting authorized sessions (0) to number of active sessions (1)
Thank you.
Dave Martini
LLNL
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] HELP!! Getting error "Tape positioning by record is disabled",
Dave Martini <=
|
|
|