We are running 7.2 and recently added a new drive. 
The library is a Storagetek SL500, the original 2
drives are HP LTO3 drives and the new drive is a IBM
LTO3 drive.  

Since the addition of the new drive, it appears that
the drives device names have changed.  (solaris9)
Tapes get mounted and don't get unmounted.  It appears
during the unmount the robot goes to the wrong drive. 
What's the best way to update the configuration.

Thanks


       
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, 
photos & more. 
http://mobile.yahoo.com/go?refer=1GNXIC

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER