John,
Please find enclosed some hacked documentation I used when doing the
same process, hope it helps. Long time since I've done one, must test
again soon!.
ASR Networker Recovery
Prerequisites
These prerequisites are the most important stage in this process. This
process needs to be tested out on each server beforehand.
In nwadmin on podsix, make sure the client has full the DNS name for the
networker interface servername.xxx.xxx.xxx. It is important you have -s
full DNS name of server on the command line for the asr recovery disk to
work.
Run Networker user on the client or a client that is available to
connect to nsrserver
The Mac addresses also needs to be in the DNS and have DHCP enabled.
Full documentation can be found in chapter 16 Windows Administrators
guide
Start Networker User with -s machine name from shortcut.
If the server does not have a floppy disk, you need to attach a USB
floppy drive before you can restore a server.
You will need to have a Windows 2003 setup disk that contains all the
required raid/hard disk and network drivers for this process to work.
See manual for
How to Create an ASR Disk Using Directed Recovery
Using the ASR Disk to Recover a NetWorker Client
Perform an ASR Recovery
You may need to edit the file asr.sif on your floppy to include the full
DNS name of the recovery server in our case podsix. This may only be
needed if DNS entries not correct.
Edit the file
Entry is down at the bottom
See manual for the following sections.
To perform an ASR recovery on a NetWorker client computer:
Requirements for an ASR Recovery
Performing an ASR recovery requires the following:
Components That Require Special Handling After an ASR Recovery
How to Verify the NetWorker Client Recovery
Limitations and Special Considerations
-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of sethq
Sent: 22 August 2007 15:11
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] ASR Win 2003 and Unix Solaris server
When Networker miniclient finished (failed), I got these errors:
Waiting for recovery to cemplete
Recovery of SYSTEM FILES: save set failed (128)
Recovery of SYSTEM DB: save set failed (128)
Recovery of SYSTEM STATE: save set failed (128)
"ASR cannot continue on this machine."
Is anybody can help my, please Neutral
Regards
+----------------------------------------------------------------------
|This was sent by john09_ad AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
*****************************************************************************************
To view the terms under which this email is distributed, please go to
http://www.hull.ac.uk/legal/email_disclaimer.html
*****************************************************************************************
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
