Hello,
Had a difficult time getting Legato 7.3.2 to run inquire and jbconfig 
under certain conditions.
1. Windows 2003-SP2 server.
2. HP branded Emulex Card i.e Lp11 or similar.
3. Drivers for Control Lun installed under system devices.
After much troubleshooting why i could not get output for inquire\jbconfig 
to work until after SP2 was removed and Drivers for Control lun were also 
removed under system devices.
Has any one come across this, what are the root causes and fixes, the Lib 
was ADIC i2K, IBM LTO2 Drives.
NOTE: I am told the inquire cmd was giving same results when no FC card 
present with SP2.
What is the relation ship between lus drivers\legato and OS ?
C:\Program Files\Legato\nsr\bin>jbconfig

Jbconfig is running on host cor1s015 (Windows Server 2003 5.2),
  and is using cor1s015 as the NetWorker server.

         1) Configure an AlphaStor Library.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
         6) Configure a Microsoft Removable Storage Jukebox.

What kind of Jukebox are you configuring? [1] 2
Scanning SCSI buses; this may take a while ...
Error in nt_lus_get_inquiry; error was 1
Incorrect function.


There appear to be no SCSI jukeboxes connected to this system.
This could mean the SCSI jukebox(es) are not connected to the system,
cannot be seen (pending a reboot) or have already been configured.
On Windows Systems, this could mean that the SCSI jukebox(es) are
enabled for Microsoft Removable Storage.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER