|
Re: [Networker] Volume name/barcode mismatch
2007-06-14 11:22:14
--On June 13, 2007 10:30:24 PM -0400 Stan Horwitz <stan AT temple DOT edu>
wrote:
On Jun 13, 2007, at 10:23 PM, Lauradel Collins wrote:
I have a SpectraLogic BullFrog (10K). Unload them then reload them.
The volume label doesn't get updated during a regular inventory and
things get confused. So I do the nsrjb -IE and things work fine.
Yes, but HOW do you load the tapes and unload them? More to the point, if
you are not using "nsrjb -d" and "nsrjb -w" and are using your tape
library directly to load/unload tapes, that's the problem.
Interesting. I do not have a silo, so -d doesn't apply. I suppose I could
try nsrjb -w which may work. Annoying, this wasn't necessary previous to
7.3.2 (and I've been using networker since at least version 4). The jukebox
has one "door" which I imagine would be the "cartridge accession port". So
I'd have to use the command line to get tapes out, one by one, rather than
using the jukebox touch screen & door button to remove tapes.
I'll try this, though I suspect just doing what I have been doing is less
complicated and just as fast.
Thanks for the idea.
lauradel
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the body of the email. Please write to networker-request
AT listserv.temple DOT edu if you have any problems with this list. You can access the
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|
