off tape to disk and then point RMAN at that area and recover from there?

George

Curtis Preston wrote:

That is correct.  RMAN will request a certain string.  If NW doesn't
know where that string is (which I'm assuming is kept in the browse
information), then it's not going to know where to get it from.

This means there's no reason to have your browse and retention periods
set different on Oracle backups.  Unlike file backups, the browse
information takes up NO space, so there's no penalty for leaving it in
there.  There's only a penalty (which it sounds like you're
experiencing) for letting it expire.

---
W. Curtis Preston
Author of O'Reilly's Backup & Recovery and Using SANs and NAS
VP Data Protection
GlassHouse Technologies


-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Randy Doering
Sent: Thursday, May 03, 2007 4:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Saveset Recovery using RMAN

Well, I'm assuming that (after reading some NMO documentation, and

getting no answer here) that a "saveset recovery" of a backup (between the browse time and retention time) would require a "scanner" command to bring the client file indexes back into the browsable timeframe so that RMAN (from the Oracle client) can then do a recovery of the backedup data.

Is this correct?

Thanks,
Randy

----- Original Message ----- From: "Randy Doering" <rdoering2 AT VERIZON DOT NET>

To: <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
Sent: Thursday, April 26, 2007 12:20 PM
Subject: [Networker] Saveset Recovery using RMAN

Hello, we are using Networker 7.3.2 (Jumbo 11) on a Linux Server.

We have NMO version 4.2-1 installed on the Oracle Client.

We have Browse/Retention setup for 30/90 days.

We can Restore the database files if they are within the 30 days

browse

time.

If there an RMAN way to restore database file which fall between the browse and retention times?

I'm not trying to use "recover -S" or saveset recover on the server

side,

but would like to have the DBA use an equivalent command/script on the

Oracle side.

Using nsrnmoinfo:
nsrnmoinfo -s networker /PJASMINE_t620870848_s20052_LVL_1/
/PJASMINE_t620870848_s20052_LVL_1/: (Inside of the browse time).
       000262 at /dev/nst9 (save time 1177560450)

nsrnmoinfo -s networker /PJASMINE_t618028080_s18488_LVL_1/
/PJASMINE_t618028080_s18488_LVL_1/: (Outside of the browse time).
       No volumes found.

The savsets all show up with mminfo -vt command on the server side.

Thanks,
Randy

To sign off this list, send email to listserv AT listserv.temple DOT edu and

type

"signoff networker" in the body of the email. Please write to networker-request AT listserv.temple DOT edu if you have any problems with

this

list. You can access the archives at http://listserv.temple.edu/archives/networker.html or via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

--
George Sinclair - NOAA/NESDIS/National Oceanographic Data Center
SSMC3 4th Floor Rm 4145       | Voice: (301) 713-3284 x210
1315 East West Highway        | Fax:   (301) 713-3301
Silver Spring, MD 20910-3282  | Web Site:  http://www.nodc.noaa.gov/

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the body of the email. Please write to networker-request 
AT listserv.temple DOT edu if you have any problems with this list. You can access the 
archives at http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER