[Networker] jbconfig error
2006-12-21 19:01:30
Hi all,
I had some library problems and had to delete my jukebox from Networker. Now
when I use jbconfig to add it again, I get all the way through defining all
of the paths and drive types, then get the following error:
jbconfig: error, SJI Failure[0x 29]: Invalid argument
Here is the full jbconfig output. Does anyone have any ideas while I'm
waiting for EMC to get back to me? Thanks!!
[root@mhp-topaz] jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 4
Enter the number corresponding to the type of jukebox you are installing:
1) ADIC-1200c/ADIC-1200d 20) Exabyte Jukebox 38) HP-Optical
2) ADIC-VLS 21) Hitachi ML010 Series 39) Sony TSL-7000
3) ARC DiamondBack 22) HP-C1553A/Surestore 12000e 40) Sony TSL-A500C
4) Breece Hill Saguaro 23) HP-C1557A/Surestore 12000e 41) Sony TSL-AIT
5) Breece Hill 24) HP C5713A 42) Digital 4mm DAT
TLZ9L
6) Philips Blackjack 25) Hewlett-Packard A4853A 43) Digital 4mm DAT
(TLZx
)
7) DLI Libra Series 26) Metrum (SCSI) 44) Digital TL800
Series
8) Quantum DLT/Digital DLT 27) Qualstar 45) Digital TL810
Series
9) Exabyte 10e or 10h 28) Spectralogic 46) Digital TL820
Series
10) Exabyte 10i 29) STK 9704/Lago 340 47) Digital TL893
11) Exabyte 18D 30) STK 9708/Lago 380 (SCSI) Datawheel 48)
Digital T
893
12) Exabyte 60 31) StorageTek 9730 49) Digital TL896
13) Exabyte 120 32) StorageTek 9738 50) Digital TL896
14) Exabyte 210 33) STK 9708/Lago 380 (SCSI) Datawheel 51)
Digital T
899
15) Exabyte 218 34) Dell PowerVault 130T 52) Digital TL899
16) Exabyte 220 35) IBM 3570 53) Digital Optical
17) Exabyte 230D 36) IBM 7331/IBM 9427 54) Digital TK Series
18) Exabyte 400 Series 37) ATL/Odetics SCSI 55) Standard SCSI
Jukebox
19) Exabyte 690D
Choice? 55
Installing an 'Standard SCSI Jukebox' jukebox.
What name do you want to assign to this jukebox device? i2000-1
Enter the control port of the jukebox in the following format:
[email protected] Pathname of the control port for the jukebox device?
scside
@4.1.0
Turn NetWorker auto-cleaning on (yes / no) [yes]? no
The drives in this jukebox cannot be auto-configured with the available
information. You will need to provide the path for the drives.
Is (any path of) any drive intended for NDMP use? (yes / no) [no]
Is any drive going to have more than one path defined? (yes / no) [no]
Please enter the device path information in one of the following formats:
/dev/rmt1.1 --for local path or
host:device-path --for remote node or
host:drive-letter:directory path --for Windows disk file
Drive 1, element 1
Drive path ? mhp-batman:\\.\Tape0
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Drive 2, element 2
Drive path ? mhp-batman:\\.\Tape1
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Drive 3, element 3
Drive path ? mhp-batman:\\.\Tape2
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Drive 4, element 4
Drive path ? /dev/rmt0.1
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Drive 5, element 5
Drive path ? /dev/rmt1.1
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Drive 6, element 6
Drive path ? /dev/rmt2.1
This path already exists in the database. Proceed with the same path?
(yes / no) [yes]
Only model LTO Ultrium-2 drives have been detected.
Are all drives in this jukebox of the same model? (yes / no) [yes]
Found device rd=mhp-batman:\\.\Tape0 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
Found device rd=mhp-batman:\\.\Tape1 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
Found device rd=mhp-batman:\\.\Tape2 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
Found device /dev/rmt0.1 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
Found device /dev/rmt1.1 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
Found device /dev/rmt2.1 already configured in NetWorker.
Delete existing definition? (yes / no) [no]
jbconfig: error, SJI Failure[0x 29]: Invalid argument
_______________________________________
/ Todd A. Willeat \
| Senior Storage Administrator |
| Sisters of Mercy Health System - MISD |
| 3637 S. Geyer Rd. |
_ | St. Louis, MO 63127 | _
/ )| (314) 364-3110 / (314) 364-3512 (fax) |( \
/ / | willt7 AT stlo.mercy DOT net | \ \
_( (_ | http://www.mercy.net/ <http://www.mercy.net/>
| _) )_
(((\ \> \/->___________<-=-=-=-=->___________<-\/ </ /)))
(\\\\ <file:///\\> \_/ / \ \_/
////)
\ / \ /
\ _/ \_ /
/ / \ \
/___/ \___\
This e-mail contains information which (a) may be PROPRIETARY IN NATURE OR
OTHERWISE PROTECTED BY LAW FROM DISCLOSURE, and (b) is intended only for the
use of the addressee (s) named above. If you are not the addressee, or the
person responsible for delivering this to the addressee (s), you are hereby
notified that reading, copying or distributing this e-mail is prohibited. If
you have received this e-mail in error, please contact the sender
immediately.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] jbconfig error,
Willeat, Todd <=
|
|
|