Hello,

As the subject says, I've got a brand new Sun V440 running Solaris 10,
with 2 StorEdge L100 tape libraries, each with 2 HP LTO3 drives. 
Running Networker 7.3.1 (storage node) and the latest recommended
patchset from Sun.  I've Googled and found different tape drive settings
for the /kernel/drv/st.conf file, but I have yet to come across the
correct one.  Here are the settings I'm currently using:

tape-config-list=
        "HP Ultrium 3", "HP Ultrium LTO3", "ULTRIUM3";

ULTRIUM3 = 2,0x3b,0,0x18659,4,0x44,0x44,0x44,0x44,3,
60,1200,600,1200,600,600,18000;

name="st" class="scsi" target=0 lun=0;
name="st" class="scsi" target=1 lun=0;
name="st" class="scsi" target=2 lun=0;
name="st" class="scsi" target=3 lun=0;
name="st" class="scsi" target=4 lun=0;
name="st" class="scsi" target=5 lun=0;
name="st" class="scsi" target=6 lun=0;
name="st" parent="fp" target=0;


Output of the 'inquire' command shows all 4 drives and jbconfig found
the libraries with no problem.

However, when I attempt a backup of a client, I get the following:

09/12/06 14:31:42 nsrd: media warning: /dev/rmt/0cbn writing: I/O error,
at file 2 record 323
09/12/06 14:31:42 nsrd: media notice: LTO Ultrium-3 tape 001000L3 on
/dev/rmt/0cbn is full
09/12/06 14:31:42 nsrd: media notice: LTO Ultrium-3 tape 001000L3 used
41 MB of 400 GB capacity
09/12/06 14:31:47 nsrd: media notice: Volume "001000L3" on device
"/dev/rmt/0cbn": Block size is 32768 bytes not 131072 bytes. Verify the
device configuration. Tape positioning by record is disabled.

I've also tried adding the following to the top of my
/etc/init.d/networker script:

NSR_DEV_BLOCK_SIZE_LTO_ULTRIUM=128
export NSR_DEV_BLOCK_SIZE_LTO_ULTRIUM


and restarted Networker, but this does not help either.

Anybody have a similar working setup, or have any ideas?  Thanks in advance!

-- 
Jim Buitt, UNIX Server Admin.
Office of Information Technology
Phone: 618-650-3447
Fax: 618-650-3599
Dunham Hall 0224 - Box 1068
Edwardsville, IL 62026
E-Mail: jbuitt AT siue DOT edu

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER