Hello,
I have Netapp Filer FAS3050 that needs to be configured with DDS\NDMP,
After much Testing i was able to zone and assign 2 Tape drives to Filer
and they are being Seen, however, when i configured the Legato ( 7.2.1
with Windows 2003\LTO2) backup complains about not avallble pools and
Devices, jbconfig output is below, i have checked and made sure all the
pools and devices are avallable and configured, my question is wheather i
used correct Device syntex when running jbconfig.
inquire-N does not report back, Tape lib is Adic i2K, and seems to be
working fine, i am able to mount the tape from the Networker server in the
remote netapp device, however no NDMP backups are occouring.
Please let me know if you have any written procedures with
Netapp\Legato\jbconfig for NDMP.
Storagenode1 is storagenode1
cor1s015 is primary backup server
netapp01b is netapp clusterb
Questions: for LTO2 what device type i should use to configure jbconfig &
wheather my device name syntex is correct or not
rst2a - rewind device, format is: LTO-II tape 400GB cmp
nrst2a - no rewind device, format is: LTO-II tape 400GB cmp
urst2a - unload/reload device, format is: LTO-II tape 400GB cmp
should i use Deive alieas for netapp or NOT ?
D:\nsr\bin>jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
6) Configure a Microsoft Removable Storage Jukebox.
What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox - [email protected].
What name do you want to assign to this jukebox device? ADIC
Turn NetWorker auto-cleaning on (yes / no) [yes]? y
The drives in this jukebox cannot be auto-configured with the available
information. You will need to provide the path for the drives.
Is (any path of) any drive intended for NDMP use? (yes / no) [no] y
Is any drive going to have more than one path defined? (yes / no) [no] y
You will be prompted for multiple paths for each drive.
Pressing <Enter> on a null default advances to the next drive.
Please enter the device path information in one of the following formats:
\\.\Tape0 --for local path or
host:device-path --for remote node or
host:drive-letter:directory path --for Windows disk file
After you have entered a device path, you will be prompted for an NDMP
user name for that path's host. If this device path is not an NDMP device,
press the enter key to advance to the next device path. For NDMP devices,
you need to enter the user name and password the first time we encounter
that NDMP host. Pressing the enter key for the NDMP user name for any
subsequent device path on the same host will set the user name and password
to those defined the first time. You will not be prompted for the password
in such a case.
Drive 1, element 256
Device path 1 ? \\.\Tape0
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape0
Enter NDMP user name for host 'storagenode1'?
Device path 3 ?
Drive 2, element 257
Device path 1 ? \\.\Tape1
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape1
Enter NDMP user name for host 'storagenode1'?
Device path 3 ? \\.\Tape2
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 4 ?
Drive 3, element 258
Device path 1 ? \\.\Tape2
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
You've already used that path name for Device 2 Path 3 .
Please choose another pathname.
Device path 1 ?
Device path 1 ?
Device path 1 ?
Device path 1 ?
Device path 1 ? I/O error or End of File encountered. Exiting.
D:\nsr\bin>jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
6) Configure a Microsoft Removable Storage Jukebox.
What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox - [email protected].
What name do you want to assign to this jukebox device? ADIC
Turn NetWorker auto-cleaning on (yes / no) [yes]? y
The drives in this jukebox cannot be auto-configured with the available
information. You will need to provide the path for the drives.
Is (any path of) any drive intended for NDMP use? (yes / no) [no] y
Is any drive going to have more than one path defined? (yes / no) [no] y
You will be prompted for multiple paths for each drive.
Pressing <Enter> on a null default advances to the next drive.
Please enter the device path information in one of the following formats:
\\.\Tape0 --for local path or
host:device-path --for remote node or
host:drive-letter:directory path --for Windows disk file
After you have entered a device path, you will be prompted for an NDMP
user name for that path's host. If this device path is not an NDMP device,
press the enter key to advance to the next device path. For NDMP devices,
you need to enter the user name and password the first time we encounter
that NDMP host. Pressing the enter key for the NDMP user name for any
subsequent device path on the same host will set the user name and password
to those defined the first time. You will not be prompted for the password
in such a case.
Drive 1, element 256
Device path 1 ? \\.\Tape0
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape0
Enter NDMP user name for host 'storagenode1'?
Device path 3 ?
Drive 2, element 257
Device path 1 ? \\.\Tape1
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? storagenode1:\\.\Tape1
Enter NDMP user name for host 'storagenode1'?
Device path 3 ?
Drive 3, element 258
Device path 1 ? \\.\Tape2
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?
Drive 4, element 259
Device path 1 ? \\.\Tape3
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?
Drive 5, element 260
Device path 1 ? \\.\Tape4
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?
Drive 6, element 261
Device path 1 ? \\.\Tape5
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ?
Drive 7, element 262
Device path 1 ? \\.\Tape6
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? netapp01b:nrst2a
Enter NDMP user name for host 'netapp01b'? root
Enter NDMP password (characters will not be echoed):
Device path 3 ? netapp01a:nrst2a
Enter NDMP user name for host 'netapp01a'? root
Enter NDMP password (characters will not be echoed):
Device path 4 ?
Drive 8, element 263
Device path 1 ? \\.\Tape7
Enter NDMP user name for host 'cor1s015.axe.anixter.com'?
Device path 2 ? netapp01b:nrst3a
Enter NDMP user name for host 'netapp01b'? root
Device path 3 ? netapp01a:nrst3a
Enter NDMP user name for host 'netapp01a'? root
Device path 4 ?
Please select the appropriate drive type number:
1) 3480 20) 9490 39) LTO Ultrium-3
2) 3570 21) 9840 40) optical
3) 3590 22) 9840b 41) qic
4) 3592 23) 9840C 42) SAIT-1
5) 4890 24) 9940 43) SD3
6) 4mm 25) 9940B 44) sdlt
7) 4mm 12GB 26) adv_file 45) sdlt320
8) 4mm 20GB 27) dlt 46) sdlt600
9) 4mm 4GB 28) dlt1 47) SLR
10) 4mm 8GB 29) dlt7000 48) tkz90
11) 4mm DAT72 30) dlt8000 49) travan10
12) 8mm 31) dst (NT) 50) tz85
13) 8mm 20GB 32) dtf 51) tz86
14) 8mm 5GB 33) dtf2 52) tz87
15) 8mm AIT 34) file 53) tz88
16) 8mm AIT-2 35) himt 54) tz89
17) 8mm AIT-3 36) logical 55) tz90
18) 8mm AIT-4 37) LTO Ultrium 56) tzs20
19) 8mm Mammoth-2 38) LTO Ultrium-2 57) VXA
Enter the drive type of drive 1? 38
Are all the drives the same model? (yes / no) [yes] y
A Dedicated Storage Node can backup only local data to its devices.
Should storagenode1 be configured as a Dedicated Storage Node? (yes / no)
[no]
Jukebox has been added successfully
The following configuration options have been set:
> Jukebox description to the control port and model.
> Autochanger control port to the port at which we found it.
> Networker managed tape autocleaning on.
> At least one drive was defined with multiple paths. All such drives
are
defined with a hardware identification as well as a path value to
avoid
confusion by uniquely identifying the drive. The hardware
identification
for all drives which have one is always 'autochanger_name - Drive #'
wher
"autochanger_name" is the name you gave to the autochanger that was
just defined, and the # symbol is the drive numer.
> Barcode reading to on.
> Volume labels that match the barcodes.
> Slot intended to hold cleaning cartridge to 102. Please insure that a
cleaning cartridge is in that slot
> Number of times we will use a new cleaning cartridge to 50.
> Cleaning interval for the tape drives to 6 months.
You can review and change the characteristics of the autochanger and its
associated devices using nwadmin.
Would you like to configure another jukebox? (yes/no) [no]
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|