Don't have your hopes up too high,

In our installation 7.3.1 on W2003 with San attached Storagetek SL500 +
2 LTO-3
The serial numbers were not recognized (complaints about them being too
long) and you have to define and attach the drives manually with
jbconfig. It takes usually 2 times to do it right ;)

Maarten 

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Gaddy
Sent: Wednesday, September 06, 2006 11:58 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] NetWorker + Windows SAN Tapes

> You can reboot the FC-SCSI bridges and sometimes that helps.
No Fibre-to-SCSI-Bridges here, only plain FibreChannel.
( And no HSG80 controllers or even HSV210s :-)

> I know the drive serialization was supposed to work on the serial 
> number of the tape drive ...

That would give some new hope, perhaps.
We have scheduled to start with 7.3.1 or 7.3.2 in November (this year
;-)

-Gaddy-

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER