Have you tried 7.3.1?
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT listserv.temple DOT edu]
On Behalf Of ssloh
Sent: Thursday, 24 August 2006 1:57 AM
To: NETWORKER AT listserv.temple DOT edu
Subject: [Networker] Cannot find an available nsrmmd service
Hi folks,
This is a serious problem, my New environment running on Solaris 10 with
Networker power edition 7.3 We have 10 pools. Each pool has it own
number of tapes and some of them just 0.1% full
The backup stuck with below messages
Aug 23 18:41:14 sabakap1 root: [ID 702911 local0.alert] Sun StorEdge(TM)
Enterprise Backup media: (waiting) Waiting for 1 writable volumes to
backup pool 'saspmdb' tape(s) on sabakap1
08/23/06 18:41:14 nsrd: Operation 7 started : Load volume `MAO155L3'.
08/23/06 18:41:14 nsrd: media waiting event: Waiting for 1 writable
volumes to backup pool 'saspmdb' tape(s) on sabakap1
08/23/06 18:41:16 nsrmmd #3: Start nsrmmd #3, with PID 2292, at HOST
sabakap1
08/23/06 18:41:18 nsrd: [Jukebox `sabakap1-c2', operation # 7]. Cannot
find an available nsrmmd service for operation on device
'/dev/rmt/0cbn'. Try again.
08/23/06 18:41:18 nsrmmgd: Cannot find an available nsrmmd service for
operation on device '/dev/rmt/0cbn'. Try again.
08/23/06 18:41:18 nsrmmgd: Jukebox `sabakap1-c2' failed to load the
requested volume.
08/23/06 18:41:22 nsrd: [Jukebox `sabakap1-c2', operation # 7]. Finished
with status: retryable
08/23/06 18:41:22 nsrmmgd: RAP error: Invalid resource data.
08/23/06 18:41:22 nsrmmgd: Cannot update operation status resource
(instance 7).
08/23/06 18:41:24 nsrd: media info: Suggest manually labeling a new
writable volume for pool 'saspmdb'
Is this a bug ? as I can see nsrd try to load the volume to the pool,
but somehow cannot find an available nsrmmd service for operation on
device .... My volume only 0.1% full and belong to this pool. Why nsrmmd
service no doing it's work. What is going wrong ?
All my schedule backup just stuck and always "Suggest manually labelling
a new writable volume for pool xxxx". Once I manually mount the tape,
the backup started. Networker should NOT work in such a way u need to
manually mount the tape for a backup to kick-off.
So I said this is a major problem in Networker. Any other suggestion ?
EMC/Legato are your solving this problem ?
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Bank or third parties. If you are not the intended
recipient of this email you should not read, print, re-transmit, store or act
in reliance on this e-mail or any attachments, and should destroy all copies of
them. Macquarie Bank does not guarantee the integrity of any emails or any
attached files. The views or opinions expressed are the author's own and may
not reflect the views or opinions of Macquarie Bank.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
