try

options scsi_mod max_scsi_luns=255

in /etc/modules.conf

but iirc you also need a kernel with CONFIG_SCSI_MULTI_LUN set

steve 
- - - 
systems & network manager
high energy physics
university of wisconsin

 > ---- Original Message ----
 > From: Lars Hecking
 >  I have a bit of a problem with a new Quantum Superloader 3. The networker
 >  host is running RedHat Enterprise 3, and the OS doesn't see the autoloade
 > r,
 >  only the tape drive:
 > 
 > # cat /proc/scsi/scsi
 > Attached devices:
 > Host: scsi1 Channel: 00 Id: 05 Lun: 00
 >   Vendor: CERTANCE Model: ULTRIUM 2        Rev: 1775
 >   Type:   Sequential-Access                ANSI SCSI revision: 03
 > Host: scsi2 Channel: 00 Id: 00 Lun: 00
 >   Vendor: LG       Model: CD-ROM CRN-8245B Rev: 1.16
 >   Type:   CD-ROM                           ANSI SCSI revision: 02
 > # /usr/sbin/inquire
 > [email protected]:CERTANCEULTRIUM 2       1775|Tape, /dev/nst0
 >                                            S/N: 4A4B30305A4E350000000000
 >                                            ATNN:CERTANCEULTRIUM 2        J
 > [email protected]:LG      CD-ROM CRN-8245B1.16|CD-ROM, /dev/sg1
 > # 
 > 
 >  Any advice? The Quantum is configured for random access.
 > 
 > To sign off this list, send email to listserv AT listserv.temple DOT edu and 
 > type
 >  "signoff networker" in the
 > body of the email. Please write to networker-request AT listserv.temple DOT 
 > edu i
 > f you have any problems
 > wit this list. You can access the archives at http://listserv.temple.edu/a
 > rchives/networker.html or
 > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER