Hi,  

Slowly getting used to my new environment here and my new life in
Croatia.

At my new company have installed 7.3 (upgrade to 7.3.1 soon)
unfortunately on Win 2003.
We have 3 extra dedicated storage nodes (2 on Win 1 on HPUX 11)
A Storagetek SL500 with 2 HP Ultrium 3 (LTO-3).
And about 30 clients in total (linux, Hpux and Win2003/Win2000)

Storage nodes and Storagetek are on San. Win and Linux Machines are
mostly HP-380.

Currently we have some problems with Tapes being flagged full much to
early (20Gb on LTO-3) without clear error messages so I switched off all
tape drives on the storage nodes and started doing backups over Lan
(1Gb).

Lets see if that gets backups to finish properly.

In the mean time I want to stage the data off the tapes that are to
early flagged full so I can inspect the tapes by writing them full with
test data.

The staging insists that it has to use a drive on the HPUX storage node
and refuses to use the free tape-drive on the backup server.

All remote tapes on the storage-nodes have however been set to disabled.

All clients have the clone storage node set to the (default) empty
field.
All clients who were dedicated storage nodes have set their storage node
field to nsrserverhost.

Any body who can shed light on this mysterious behavior ?

Maarten (back on the list)

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER