Thanks syam,
This result of inquire and sjisn :
#inquire
[email protected]:NETAPP SES INTERCONNECT0.1 | (Unknown Device Tape a)
[email protected]:NETAPP SES INTERCONNECT0.1 | (Unknown Device Tape a)
[email protected]:IBM ULT3580-TD2 59P3 | Tape
[email protected]:IBM ULT3580-TD2 59P3 | Tape
[email protected]:IBM ULT3580-TD2 59P3 | Tape
[email protected]:IBM ULT3580-TD2 59P3 | Tape
[email protected]:IBM ULT3580-TD2 59P3 | Tape
[email protected]:IBM 03584L32 3480 | Autochanger (Jukebox)
S/N: 0000078150240401
ATTN:IBM 03584L32 0000078150240401
#sjisn [email protected]
Serial Number data for [email protected] ( IBM 03584L32 ):
Library:
Serial Number : 0000078150240401
SCSI-3 Device Identifiers:
ATTN:IBM 03584L32 0000078150240401
It's look serial number and address was right. But i confused about
[email protected] , why netapp device detected on solaris and why not IBM drive ,
if we look from inquire total IBM drive only 5 and 1 missing.
Thanks,
Ali
----- Original Message -----
From: Shyam Hegde
To: NETWORKER AT listserv.temple DOT edu ; muhamli AT indosat.net DOT id
Sent: Wednesday, May 31, 2006 7:47 PM
Subject: Re: [Networker] Drive IBM problem
Hi Ali,
There seems to be a drive sequence problem. Check and compare the outputs of
"inquire" and "sjisn [email protected]" (Bus.Target.Lun #s of the jukebox robot).
Compare drive path, serial number of drives and element address.
If drive path is wrong, it is possible for NetWorker to issue control
commands to a wrong drive and expect the other one to perform the operation!
Regards
Shyam
On 5/31/06, muhamli <muhamli AT indosat.net DOT id> wrote:
Dear All,
I have problem with drive LTO-II IBM3584 , after jbconfig 5 of 6 drives
problem , when load / label / inventory , the error messages is
"/dev/rmt/... read open error: drive status is There is not a tape in drive"
. Can someone help me ?
Server backup : SunE480 with solaris 8
Library : IBM3584 witch 6 drives
Connection from server to library using fiber cable via brocade
Thanks,
Ali
To sign off this list, send email to listserv AT listserv.temple DOT edu
and type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT
edu if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|