Thanks Fazil for your input. I'm inclined to agree with you but I'm
confused by the fact that scanner -v is showing the block size as 131072,
or 128K.
-ty
Phillip T. ("Ty") Young, DMA
Manager, Data Center and Backup/Recovery Services
Information Services
i2 Technologies, Inc.
Fazil Saiyed
<fazil.saiyed@ANI
XTER.COM> To
Sent by: Legato NETWORKER AT LISTSERV.TEMPLE DOT EDU
NetWorker cc
discussion
<NETWORKER@LISTSE Subject
RV.TEMPLE.EDU> [Networker] my FC-attached sdlt320
drives can't properly restore tapes
they wrote previously
05/19/2006 08:20
AM
Please respond to
Legato NetWorker
discussion
<NETWORKER@LISTSE
RV.TEMPLE.EDU>;
Please respond to
Fazil Saiyed
<fazil.saiyed@ANI
XTER.COM>
Looks like when you moved from SCSI to FC drives, your privious Block size
on the drive was lower ( or heigher) then now, this would be a problem,
check and see if you could lower the block size on one of your FC attached
drives and make it read only ( if you could afford to do this) so that you
can use it to restore till your data expires and them change to block size
to match others, there may be alternate ways to do it, but i would stay
away from mixing block size in the same datazone while writing data.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|