Networker

Re: [Networker] Mounted volumes from a frame

2006-05-12 10:44:39
Subject: Re: [Networker] Mounted volumes from a frame
From: Stan Sander <ssande AT SANDIA DOT GOV>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Fri, 12 May 2006 08:38:50 -0600
Rohrich, James wrote:
An HP unix server is backing up another HP Unix server. Both are running
HPUX11.x and are using Networker 7.1.1. The client has several volumes
mounted from an EMC frame. Though all is used in the client setup for
saves, the backup server only appears to be picking up the local drives.
Since these are mounted volumes, should not NetWorker have picked up
these additional save sets.

James Rohrich
Enterprise Data Architect
IT Planning
UOP LLC
25 E. Algonquin Rd.
Des Plaines, Illinois 60016
Tel: (847) 391-3958
james.rohrich AT uop DOT com
WWW.UOP.COM

Nope. All really means "all local drives" if you want NFS mount points to be backed up you have to specify them explicitly.


--
Stan Sander - CSU Special Projects  (505)284-4915
ASAP, LLC, Contractor assigned to Sandia National Laboratories
Unix Systems Administrator

Microsoft: You've got questions. We've got a dancing paperclip.

To sign off this list, send email to listserv AT listserv.temple DOT edu and type 
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>