Re: [Networker] Sun/Emulex HBAs and Solaris 10
2006-04-23 11:51:44
Ty,
Sun's new drivers have moved the binding out of
the conf files. I believe that you need to use the
cfgadm command to bind the tapes. Try doing a man of
cfgadm.
-Kyle
--- Ty Young <phillip_young AT I2 DOT COM> wrote:
> All,
>
> I just received the last part of our new bkup
> system, consisting of
>
> 2 x Sun T2000 servers (one as a NetWorker server,
> and one as a storage
> node)
> 1 x StorageTek L500 library (4 x LTO3 drives)
> 1 x Brocade 4100 switch
> 2 x Sun/Emulex dual-port 4Gbit HBAs
>
> The configuration we've chosen is to drive two tape
> drives with each
> T2000, and hook the library robotics (also FC) onto
> the first HBA port.
> The switch has been zoned this way and the drives
> and robotics are being
> seen by the appropriate hosts.
>
> My question is this. Shouldn't there be an entry in
> some sort
> of /kernel/drv/*.conf file to bind the tape drives'
> WWNs to the HBAs?
> I'm new to FC-connected drives, so I may not be
> asking an intelligent
> question.
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff
> networker" in the
> body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have
> any problems
> wit this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html
> or
> via RSS at
>
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|