Hi

I'm seeing this same issue on SLES 9 SP2 systems with the current Qlogic
Fibre Channel driver.  Changing drivers didn't not fix the problem.

tl

Terry Lemons
CLARiiON Appliance Engineering
CLARiiON Application Solutions Integration
EMC² 
where information lives
4400 Computer Drive, MS D239
Westboro MA 01580
Phone: 508 898 7312
Email: Lemons_Terry AT emc DOT com

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] 
On
Behalf Of Ronny Egner
Sent: Friday, April 21, 2006 9:00 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] media warning: /dev/nst3 reading: Cannot allocate
memory

Hi List,

in my logs i noticed the following messages when starting to
write to any tape (it does happen to /den/nst0 and so on as
well):


1. from daemon.log:

04/21/06 14:40:04 nsrd: media warning: /dev/nst3 reading: Cannot 
allocate memory


2. from /var/log/messages:

Apr 21 14:40:04 yellow-eyed kernel: st3: Failed to read 131072 byte 
block with 65536 byte read.



I have these messages for a while in my logs - but i´ve never
seen "Cannot allocate memory" in daemon.log. Saves (and recoveries !!)
work fine...



Is there something to worry about ?



Thanks !



-- 



Mit freundlichen Grüßen

Ronny Egner

SIV.AG
Konrad-Zuse-Straße 1
18184 Roggentin

Telefon: +49 (0)3 81 / 25 24 422
Telefax: +49 (0)3 81 / 25 24 399

mailto:ronny.egner AT siv DOT de
http://www.siv.de

**********************************************************************
This email and any files transmitted with it are confidential
and intended solely for the use of the individual or entity
to whom they are addressed. The views expressed in this
e-mail are those of the individual author and not necessarily
those of SIV.AG.

This footnote also confirms that this email message has
been swept by serval anti-virus tools for the presence
of computer viruses.
**********************************************************************

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER