[Networker] Zoning_Brocade_Adic i2K_Overlaping zones Not working
2006-03-31 11:28:00
Hello,
I am having lots of trouble with ADIC Tape lib working with Storage node
server and MS.
Our confgiguration is as below.
One Master server attached to Adic i2K lib zoned to Brocade 3800 swithes at
WWW level, tape robot is also assigned to the server host on this FA.
Storage node is also accessing the same tape lib zoned for two of the 8
drives on the lib to the same FA on Adic.
Even though the sn server sees the drive in DM and inquire cmd is reporting
the drives to be there, do this date i have not been able to use MT or
native backup utility to werite to it.
In this senario i have overlaping zones to Adic lib, is Brocade zoning
correct, should i have zoned all hosts and lib in one zone vs two seperate
zones? What do you think is hapening, why the lTO-2 drives are inaccisble
from SN server even thoughh they seems to be right there.
Zone
MS+Adic+Brocade--Zone1
SN+ADIC ( two drives)+Brocade--Zone2
Should this be like below.
MS+ADIC+SN+Brocade in Zone1.
Any one with Brocade knowledge with zoning please help.
Thanks
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Zoning_Brocade_Adic i2K_Overlaping zones Not working,
Fazil Saiyed <=
|
|
|