This was it EXACTLY.
The robotic SCSI ID has to be > the tape drives. The default ADIC ships
with the library is the robotics at SCSI ID 0. We changed that to 2 for
the robotics and 0 & 1 for the drives. jbconfig autoconfigured it.
The tech at ADIC had no clue, neither did Legato. Thanks for the info.
It may not make any diff, but at least I feel better.
----
Matthew Huff | One Manhattanville Rd
Dir of Operations | Purchase, NY 10577
OTA LLC | Phone: 914-460-4039
www.otaotr.com | Fax: 914-460-4139
> -----Original Message-----
> From: Bradley Todd [mailto:bradleyt AT DISCOVERY.CO DOT ZA]
> Sent: Friday, February 24, 2006 2:29 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU; Matthew Huff
> Cc: Bradley Todd
> Subject: Re: ADIC SCALAR 24 on a Windows 2003 Storage Node
>
> Hi,
>
> We have exactly the same config only with two drives and had
> the same issue.
> The response from ADIC was that we should change the SCSI
> id's on the library... The drives have to have lower scsi
> id's than robot (I know it doesn't make sense) but here is a
> printout of an inquire:
>
> [email protected]:IBM ULTRIUM-TD2 4772|Tape, \\.\Tape0
> S/N: 1110129579
> ATNN:IBM
> ULTRIUM-TD2
> 1110129579
> [email protected]:IBM ULTRIUM-TD2 53Y2|Tape, \\.\Tape1
> S/N: 9110084980
> ATNN:IBM
> ULTRIUM-TD2
> 9110084980
> [email protected]:ADIC Scalar 24 227A|Autochanger (Jukebox)
> S/N: ADIC_1_9Y3484604
>
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|