Re: [Networker] Tape drive issue
2006-02-23 03:29:38
On Wed, 22 Feb 2006 19:51:05 -0500, Steven Frost
<Steven.Frost AT POWERCO.CO DOT NZ> wrote:
>Hi - we have 2 sites , one a W2K3 (SP1) storage node with a MSL5026
>library , and the Legato W2K3 standard server with a MSL5052 library. Both
>libraries have 2 sdlt320 tape drives. The drives attached to the server
>show 128K block size, but the storage node devices are only 64K. Tapes
>written via the server cannot be read on the storage node device if we lose
>the other library. I have run scanner on such a tape and it fails
>immediately. What should I be looking at to get the storage node devices
>configured the same as the server devices? BTW these are both SAN attached -
> fiber switched etc.
>
Hi,
If both Servers have different SP's you could checkout :
http://support.microsoft.com/kb/907418/en-us
We have currently an Problem with the Blocksize too.
The Hotfix didn't resolved our Problem so HP is working on it,
but maybe your Problem is caused by the Servicepack too.
regards
Stefan Kapitza
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|