Try changing the clone storage node attribute to list only snode2
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]On Behalf Of George Sinclair
Sent: Wednesday, December 14, 2005 5:12 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] How to clone from storage node to same storage
node?
Is there a trick to clone from a storage node to the same storage node?
We're running an older release 6.1.1.
I have two storage nodes (snode1, snode2). These are full storage nodes,
not dedicated, and each manages one library or jukebox. I have both
listed under the "Storage nodes" field for the primary server
(order=snode1,snode2,nsrserverhost), and I have both listed for the
"Clone storage nodes" field (same order). Neither the backup pool nor
the clone pool have any restrictions, so there are no devices, levels,
etc. selected. All devices have a "Save mount timeout" of 10 and "Save
lockout" of 1. For both jukeboxes, I have "Max parallelism" set to the
number of drives in the library, not 1 less, which is the default. These
storage nodes function perfectly fine during backups.
snode2 has both the backup volume and an appendable clone volume. Both
volumes are appendable and are not physically write protected or set to
read-only, and they both show up in the inventory.
When I run a clone command from my host as:
nsrclone -s server -b pool -S ssid
It loads the original backup tape on snode2 into the first drive. It
then requests a clone volume on snode1 and just sits there.
After a while, it issues a retry message, but never mounts the clone
volume. Here's what happens from the command line:
Automatically copying save set(s) to other volume(s)
Starting cloning operation ...
...from storage node: snode2
NSR server server: retry needed
nsrclone: waiting 30 seconds then retrying
I can clone from snode1 to snode1 but cloning from snode2 to snode2
seems to continue to ask for a clone volume on snode1 no matter how
long I wait.
Is it necessary to have both storage nodes defined as clients? If so,
does it matter if they're not in any active groups? We have snode1 in
the client list, and it has 'snode1' listed for the "Storage nodes"
field and nothing for the "Clone storage nodes" field. We don't have
snode2 listed as a client.
Thanks.
George
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
