Hi,
try to restart your service networker backup server, then if still no success,
try to enter save -c backup-client in the "backup command of the client.
Marcel
-----Message d'origine-----
De : Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]De la part de NETWORKER automatic
digest system
Envoyé : samedi 26 novembre 2005 06:01
À : NETWORKER AT LISTSERV.TEMPLE DOT EDU
Objet : [SPAM] - NETWORKER Digest - 24 Nov 2005 to 25 Nov 2005
(#2005-294) - Bayesian Filter detected spam
There are 3 messages totalling 236 lines in this issue.
Topics of the day:
1. Unable to use backup cleints using Server Network Interface (2)
2. Source for LTO2 Barcode labels?
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
----------------------------------------------------------------------
Date: Fri, 25 Nov 2005 16:19:53 -0000
From: "Kilpatrick, Mark" <mark.kilpatrick AT SABEO DOT COM>
Subject: Unable to use backup cleints using Server Network Interface
Hi, I am attempting to configure my clients to use a backup lan (windows
clients and windows networker 7.2.1 server). I can ping the backup lan
IP address allocated to the networker server and the clients in both
directions. I can telnet to the port 7938 using the backup lan ip
addresses.
I have configured the host file on the networker server to contain the
backup lan IP addresses and the backup hostname (backup-client1 rather
than client1). I have configured the host file on the clients to contain
the backup lan IP addresses and the backup hostname (backup-client1
rather than client1). I have also configured the hosts files to contain
the backup lan IP address and hostname for the networker server.
I have edited the client (original hostname) and entered the alias of
the backup hostname. I have edited the field Server Network Interface
and put in the backup-lan hostname. I have made the servers file on each
client and server empty and restarted the services.
I receive the following error message on test backups: RPC error:
Program not registered. Cannot access nsr server 'clientname'
Any suggestion please!
Regards, mark
Due to continued expansion Sabeo Technologies have moved office +IBM to The
Courtyard, Carmanhall Road, Sandyford, Dublin 18. Our telephone and fax
numbers remain unchanged. A location map is available on our website
www.sabeo.com.
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
Sabeo Technologies.
This footnote also confirms that this email message has been swept for the
presence of computer viruses.
**********************************************************************
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
------------------------------
Date: Fri, 25 Nov 2005 17:27:03 -0000
From: "Kilpatrick, Mark" <mark.kilpatrick AT SABEO DOT COM>
Subject: Re: Unable to use backup cleints using Server Network Interface
Resolved - in the server network interface I put the backup-lan hostname
of the client rather than the backup-lan hostname of the networker
server.
-----Original Message-----
From: Kilpatrick, Mark
Sent: 25 November 2005 16:20
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] Unable to use backup cleints using Server Network
Interface
Hi, I am attempting to configure my clients to use a backup lan (windows
clients and windows networker 7.2.1 server). I can ping the backup lan
IP address allocated to the networker server and the clients in both
directions. I can telnet to the port 7938 using the backup lan ip
addresses.
I have configured the host file on the networker server to contain the
backup lan IP addresses and the backup hostname (backup-client1 rather
than client1). I have configured the host file on the clients to contain
the backup lan IP addresses and the backup hostname (backup-client1
rather than client1). I have also configured the hosts files to contain
the backup lan IP address and hostname for the networker server.
I have edited the client (original hostname) and entered the alias of
the backup hostname. I have edited the field Server Network Interface
and put in the backup-lan hostname. I have made the servers file on each
client and server empty and restarted the services.
I receive the following error message on test backups: RPC error:
Program not registered. Cannot access nsr server 'clientname'
Any suggestion please!
Regards, mark
Due to continued expansion Sabeo Technologies have moved office - to
The Courtyard, Carmanhall Road, Sandyford, Dublin 18. Our telephone and
fax numbers remain unchanged. A location map is available on our website
www.sabeo.com.
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
Sabeo Technologies.
This footnote also confirms that this email message has been swept for
the presence of computer viruses.
**********************************************************************
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
------------------------------
Date: Fri, 25 Nov 2005 13:26:54 -0500
From: "Clark, Patricia" <Clarkp AT OSTI DOT GOV>
Subject: Re: Source for LTO2 Barcode labels?
Avery has freeware you can download to generate any type of label that
they produce. I've been using it for years for DLT and LTO tapes.
Barcode labels are pretty simple. For the price of a box of labels,
you too can make your own. And, if you want to see what you can do
before buying labels, just download their software and practice with
regular paper.
Patti Clark
Unix Sys Admin
OSTI/DOE
-----Original Message-----
From: Dave Mussulman [mailto:mussulma AT CS.UIUC DOT EDU]
Sent: Wednesday, November 23, 2005 10:57 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Source for LTO2 Barcode labels?
For LTO3 and an HP MSL6000, I'm using Avery 6577 labels and the LTO
Barcode software from http://www.jdtools.ca/
Dave
On Wed, Nov 23, 2005 at 10:33:45AM -0500, Albert Eddie Contractor AFRPA
CIO/IT wrote:
> Could someone please recommend a source for LTO2 barcode labels that
are
> useable/readable by the SCALAR 24/100s?
>
> I asked ADIC for a quote and the idiots must have thought I was the
guy
> who bought the $5,000 hammer for the Air Force.
>
> They quoted me $2,550 for 1,500 labels! All labels were to be numbered
> in excess of 1,000. It can't be that big a deal to have a stack of
> stickers and run them through a barcode printer.
>
> Any recommendations sincerely appreciated!
>
> //SIGNED//
>
> Eddie Albert, Network Engineer
> Air Force Real Property Agency
> Chief of Information Office
> Division of Information Technology
> OFC (703) 696 - 5509
> CEL (703) 517 - 3855
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
> body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems
> wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
------------------------------
End of NETWORKER Digest - 24 Nov 2005 to 25 Nov 2005 (#2005-294)
****************************************************************
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
