Based on the output from inquire, you should be using [email protected] instead
of [email protected]
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]On Behalf Of Barber, Tony
Sent: Thursday, November 03, 2005 3:27 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries
Yesterday we connected to the ADIC Changer using a SCSI Connection,
inquire now sees the ADIC Scalar i2000
hdfscclgto:/root:-#-> inquire
[email protected]:IBM ST336753LC 4335|Disk, /dev/rhdisk0
[email protected]:IBM HSBPD6X PU4SCSI0017|(Unknown Device Type d)
[email protected]:IBM ST336753LC 4335|Disk, /dev/rhdisk1
[email protected]:IBM HSBPD6X PU4SCSI0017|(Unknown Device Type d)
[email protected]:ADIC Scalar i2000 300A|Autochanger (Jukebox)
S/N: ADIC203101567_LL0
ATNN:ADIC 203101567_LL0
[email protected]:EMC SYMMETRIX 5670|Disk, /dev/rhdisk2
S/N: 430063000000
[email protected]:IBM ULTRIUM-TD3 5481|Tape, /dev/rmt1.1
S/N: F001A0E007
ATNN:IBM ULTRIUM-TD3
F001A0E007
WWNN:500308C001A0E007
WWPN:500308C001A0E008
PORT:00000001
[email protected]:IBM ULTRIUM-TD3 5481|Tape, /dev/rmt0.1
S/N: F001A0E001
ATNN:IBM ULTRIUM-TD3
F001A0E001
WWNN:500308C001A0E001
WWPN:500308C001A0E002
PORT:00000001
------------------------------------------------------------------------
-----------
The only problem now is that jbconfig still cannot see the ADIC i2000
hdfscclgto:/root:-#-> jbconfig
1) Configure an AlphaStor/SmartMedia Jukebox.
2) Configure an Autodetected SCSI Jukebox.
3) Configure an Autodetected NDMP SCSI Jukebox.
4) Configure an SJI Jukebox.
5) Configure an STL Silo.
What kind of Jukebox are you configuring? [1] 2
jbconfig: Jukebox error: scsi command MODE_SENSE failed
=========================================================
What kind of Jukebox are you configuring? [1] 4
Enter the number corresponding to the type of jukebox you are
installing:
1) ADIC-1200c/ADIC-1200d 20) Exabyte Jukebox 38) HP-Optical
2) ADIC-VLS 21) Hitachi ML010 Series 39) Sony TSL-7000
3) ARC DiamondBack 22) HP-C1553A/Surestore 12000e 40) Sony
TSL-A500C
4) Breece Hill Saguaro 23) HP-C1557A/Surestore 12000e 41) Sony
TSL-AIT
5) Breece Hill 24) HP C5713A 42) Digital 4mm DAT
TLZ9L
6) Philips Blackjack 25) Hewlett-Packard A4853A 43) Digital 4mm
DAT (TLZxx)
7) DLI Libra Series 26) Metrum (SCSI) 44) Digital TL800
Series
8) Quantum DLT/Digital DLT 27) Qualstar 45) Digital TL810
Series
9) Exabyte 10e or 10h 28) Spectralogic 46) Digital TL820
Series
10) Exabyte 10i 29) STK 9704/Lago 340 47) Digital TL893
11) Exabyte 18D 30) STK 9708/Lago 380 (SCSI) Datawheel 48)
Digital TL893
12) Exabyte 60 31) StorageTek 9730 49) Digital TL896
13) Exabyte 120 32) StorageTek 9738 50) Digital TL896
14) Exabyte 210 33) STK 9708/Lago 380 (SCSI) Datawheel 51)
Digital TL899
15) Exabyte 218 34) Dell PowerVault 130T 52) Digital TL899
16) Exabyte 220 35) IBM 3570 53) Digital Optical
17) Exabyte 230D 36) IBM 7331/IBM 9427 54) Digital TK
Series
18) Exabyte 400 Series 37) ATL/Odetics SCSI 55) Standard SCSI
Jukebox
19) Exabyte 690D
Choice? 1
Installing an 'ADIC-1200c/ADIC-1200d' jukebox.
What name do you want to assign to this jukebox device? ADIC JUKEBOX
Enter the control port of the jukebox in the following format:
[email protected] Pathname of the control port for the jukebox device?
[email protected]
jbconfig: Unable to open SJI device [email protected]. Check device,
connections and drivers.
Unable to access device "ADIC-1200c/ADIC-1200d" on control port
"[email protected]".
Have you already installed the "drivers" package on this machine?
(yes/no) y
jbconfig: Unable to open SJI device [email protected]. Check device,
connections and drivers.
jbconfig: error, There appears to be something incorrect about your
driver
installation. Please consult your driver documentation
to help you troubleshoot your installation.
-----------------------
TONY BARBER
UNIX SYSTEMS ADMINISTRATOR
775-886-3989 (Direct) 775-720-9475 (Cell)
tony.barber AT hdfsi DOT com
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of McLeavey, Ian
Sent: Tuesday, November 01, 2005 4:03 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries
Tony,
I Managed to get the partition to see the ADIC ,
the issue was that I had no SCSI devices and this stopped the /dev/lus
device being created.
I attached a SCSI card and CDROM to my LPAR and i can now run inquire
and jbconfig on the ADIC.
My issue was that all of my devices were Fibre attached and i had no
SCSI at all.
Ian.
________________________________
From: Legato NetWorker discussion on behalf of Barber, Tony
Sent: Mon 10/31/2005 17:14
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries
We have been trying to get our AIX Version 5.3 server to see the ADIC
scalar i2k Jukebox for the past few weeks. At first we could not get
even the Legato inquire command to see anything. After updating AIX to
the latest updates the inquire command sees the two LTO-3 Tape Drives.
It still does not see the ADIC i2k Autochanger. Even tried the Legato
command: changers -dvl
It only sees the two LTO-3 Tape Drives. Both AIX and Legato have been
working on the problem. Any suggestions???
-----------------------
TONY BARBER
UNIX SYSTEMS ADMINISTRATOR
775-886-3989 (Direct) 775-720-9475 (Cell) tony.barber AT hdfsi DOT com
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Sackson [US], Mark A.
Sent: Monday, October 31, 2005 2:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries
We are running the ADIC scalar i2k with NSR 7.2.172 on AIX 5.1. It took
a while to get everything to talk properly, but once it did, we not had
any major problems. Mark
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of McLeavey, Ian
Sent: Sunday, October 30, 2005 10:23 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] AIX and NSR and Libraries
I am looking to connect an ADIC scalar i2k to NSR 7.1.3 on AIX 5.3 with
LTO-2 drives What experience do people have on device drivers and
software to control the autoloader ??
Thanks
Ian Mcleavey
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|