Hi,
Try to set CDI in the device resource to not used !
Reg: R.
-----Ursprüngliche Nachricht-----
Von: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
Im Auftrag von Martin
Gesendet: Donnerstag, 3. November 2005 13:29
An: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Betreff: [Networker] NDMP Backup causing tape errors
Hi,
I wonder if anyone can help. We run Networker 7.1 with a Windows 2000
client that we are backing up via NDMP to LTO-2 drives. The backup starts,
loads a tape into the drive, and verifys the label. Then it gives the
error messages "failed to close NDMP tape device,SCSI device is not
open", "failed to open NDMP tape device, I/O error" before hanging the
jukebox on unload retry errors.
Although this backup has worked in the past. I believed it was a timing
error that probably needed the Unload Sleep, Load Sleep, Eject Sleep
settings to go up to 180 Seconds. from 5. I changed the settings but still
the same errors.
I'm thinking it could be the LTO drive itself that might need changing but
all the other non-NDMP backups work fine through that drive.
Thanks for any help,
Martin.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|